KARLTON style front wide fender flares for Subaru Impreza | Hawkeye | 2005-2007

The Karlton body kit is one of the most famous expansion kits for the Subaru Impreza. The design of these Fender Flares fits perfectly into the overall design of the car and doesn't stand out from it. If you've widened your wheelbase you just need this kit

As for this model, the front arch extenders are designed specifically for the second restyling of the second generation Subaru Impreza GD , it is called HAWKEYE among its own.
The front bumper has a distinctive ledge and these wheel arch extenders are designed specifically for the second restyled second generation version, the STOCK / WRX and STI bumper versions have the same ledge and be sure that these fender flares will fit your car perfectly! All you need to do is to find the right rear arch extensions which will fit your car, there are 2 options, STOCK / WRX or STI
Our team has prepared all variations of Karlton for Subaru Impreza GD and you can easily find the right one for you and collect a complete set of extensions in our tuning store RisingTuning

If you have difficulty in your choice, the photos in our gallery can tell you, or if there are doubts in your choice, you can always write to us and send a photo of your car, our specialists will tell you

Item Content:
Karlton style front fender flares for Subaru Impreza GD 2005-2007 
• Front fender flares - 2 pcs.
Especially for the Hawkeye front bumper

Features of this product:
• Made of high-quality Fiberglass
• Adds 40mm (1.6 inches) to each fender.
• Slight preparation for painting is required to customize the fitment;
• Surface finish: unpainted mat
• Material thickness 4 mm
• The product is unpainted. Therefore can have small scratches. Use without coating or painting is not provided
• We do not offer work to painting car parts to export.

More:
If this page was recommended to you and you were looking for a KARLTON extension kit for the pre and second restyling versions, we have great news - we have them in our store, we will be happy to offer you:
Complete wide body kit set for BugEye | 2000-2002
Front fenders Karlton for BlobEye | 2005-2007
Rear fenders Karlton for WRX bumper | HawkEye & BlobEye | 2002-2007
Rear fenders Karlton for STI bumper | HawkEye & BlobEye | 2002-2007


This front fenders is compatible with this cars:

STOCK

Europe / World:
Subaru Impreza (GD/G11), 2 Generation Second Restyling, Sedan 5-doors, Body: GD9, GDD, Years: 06.2005 - 08.2007

Japan / World:
Subaru Impreza (GD/G11), 2 Generation Second Restyling, Sedan 5-doors, Body: GDC, GDD, GD2, GD3, Years: 06.2005 - 06.2007

WRX 

Europe / Japan / World:
Subaru Impreza WRX (GD/G11), 2 Generation Second Restyling, Sedan 5-doors, Body: GD, GDG, Years: 06.2005 - 08.2007

WRX STI

Europe / World:
Subaru Impreza WRX STI (GD/G11), 2 Generation Second Restyling, Sedan 5-doors, Body: GD, Years: 06.2005 - 09.2007

Japan / World:
Subaru Impreza WRX STI (GD/G11), 2 Generation Second Restyling, Sedan 5-doors, Body: GDB, Years: 06.2005 - 09.2007

*Only for sedan, second restyling second generation!

Years: 2005, 2006, 2007

Installation:
Installation is not easy, you will need an expert unless you are an expert in bodywork yourself.
For a perfect result, we recommend that you contact a professional!

First of all check the elements to the body, for example using masking adhesive tape glue arches to the body and conduct a visual assessment (fitting) - matrices were created with the car that was new from the salon, during the operation your car was involved in the accident, if you have deformities on the body tell the master at the same time to eliminate the defects on the body to the factory condition, This will create a perfect seal between the fender flares and the body of your Subaru Impreza, as well as eliminate any tension of the material during installation and operation - the part should stand freely - it has elasticity and memory, do not deviate from the norm of memory material, aggressive tensioning can cause a gap in the connection over time during operation.

After fitting and eliminating possible bodywork, make a mark for the installation of body extension Karlton, mark places for drilling for rivets or bolts. You can use masking tape as a canvas to make the markings and not to spoil the car's paintwork.
Once you have everything measured, drill holes in the body and fenders and install them on the car, remove them and now you can paint the parts.

After painting, wait until the parts are completely dry, and once they are dry, install them. Treat the holes - protect the exposed metal from oxidation, the paint has the same protective function, not only aesthetic.
For a right and technological joint use sealing tape, it is also available in our store, it is the right and technological solution, it will avoid damage to paintwork, will dampen the vibration and help reduce the stress of the materials when using the car, not all roads are like a race track, Subaru fans are special fans to go beyond the highway taking all the advantages of four-wheel drive, especially for you - must seal. All materials have a different density, the sealant will be able to compensate for the different density of the material, especially between the metal and Fiberglass use sealing tape, it will perform a shock-absorbing role as well as keep moisture to the metal.

You can also install the extension to the black sealant car, in this option does not need to make holes in the body, but use only quality materials, if installed on the sealant, it will perform cushioning and moisture protection functions, sealant in this option is not necessary

Material of this fenders:
The fender flares is made of quality fiberglass and the most expensive epoxy resins that are designed to create tuning parts. We use only the best matrixes that are created by real professionals who are engaged in the creation of parts for more than a decade.
The fender flares a base gray primer and is ready for painting.