KEIN Lift Kit for Subaru Legacy 1st Gen | BC BJ BF & Subaru Impreza | GM GC GF

  • Product Code:
  • Product Article:
  • Rating:
  • Availability:

    In Stock

331,65 €

currency on the site: Euro (EUR).
Shipping already included in the cost of good FREE WORLDWIDE SHIPPING

New at RisingTuning, the KEIN Lift Kit for the first generation Subaru Legacy and Subaru Impreza. What is its main difference from other lift kits? First - Front spacers have height 50mm, and at increase in clearance more than 2 inches radically changes angle of wheel convergence, that is why spacers are made with displacement, such decision leaves possibility to adjust suspension more accurately and drive comfortably not only off road but also on highway, amplitude of angles adjustment (camber and caster) remains on factory values. Front spacers are mirrored and navigated for installation, for the right side you need spacer R, respectively for the left side - L. And also the arrows will show you which side to install it.


Front steel spacers | 50 mm / 2 inches (2 pcs.)
Lower the upper strut mount when raising the suspension by 50 mm for the 1st generation Subaru Legacy & Subaru Impreza.
• Fastening elements: Studs M8 - 6 pcs, Nuts M8 - 6 pcs, galvanized. 

Rear steel spacers | 50 mm / 2 inches (2 pcs.)
Lower the lower strut mount when raising the suspension by 50 mm for the 1st generation Subaru Legacy & Subaru Impreza.
• Fastening elements: Studs M8 - 6 pcs, Nuts M8 - 6 pcs,  galvanized.

Trailing arm brackets | 50 mm / 2 inches (2 pcs.)
• Fastening elements: Studs M8 - 6 pcs, Washers M8 - 6 pcs, galvanized.

• Material: Steel
• Thickness: 3mm
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 10.9 zinc

Weight: 3.5kg.

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the suspension are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.

This complete lift kit is compatible with this cars:


Europe & World:
Subaru Legacy [BC | B10], 1 Gen, Sedan, 02.1989 - 05.1991, Body: BC
Subaru Legacy [BC | B10], 1 Gen Facelift, Sedan, 06.1991 - 07.1994, Body: BC
Subaru Legacy [BJ, BF | B10], 1 Gen, Wagon, 02.1989 - 05.1991, Body: BJF
Subaru Legacy [BJ, BF | B10], 1 Gen Facelift, Wagon, 06.1991 - 07.1994, Body: BJF

Japan & World:
Subaru Legacy [BC | B10], 1 Gen, Sedan, Years: 02.1989 - 05.1991, Body: BC2, BC3, BC4, BC5
Subaru Legacy [BC | B10], 1 Gen Facelift, Sedan, Years: 02.1989 - 05.1991, Body: BC2, BC3, BC4, BC5, BCA
Subaru Legacy [BJ, BF |B10], 1 Gen, Wagon, Years: 02.1989 - 05.1991, Body: BF3, BF5, BFA
Subaru Legacy [BJ, BF |B10], 1 Gen Facelift, Wagon, Years: 06.1991 - 09.1993, Body: BF3, BF5, BF7, BFA, BFB

Years of issue Legacy: 1989, 1990, 1991, 1992, 1993, 1994


Europe & World:
Subaru Impreza [GF | G10], 1 Gen, Wagon, Years: 06.1992 - 12.1996, Body: GF4, GF6
Subaru Impreza [GF | G10], 1 Gen Facelift, Wagon, 06.1996 - 12.2000, Body: GF4, GF8, GF8LD
Subaru Impreza [GC | G10], 1 Gen, Sedan, Years: 06.1992 - 12.1996, Body: GC4, GC6
Subaru Impreza [GC | G10], 1 Gen Facelift, Sedan, 06.1996 - 12.2000, Body: GC4, GC8, GC8LD

Japan & World:
Subaru Impreza [GC | G10], 1 Gen, Sedan, 11.1992 - 08.1996, Body: GC1, GC4, GC6
Subaru Impreza [GC | G10], 1 Gen, Coupe, 11.1992 - 08.1996, Body: GC1, GC4
Subaru Impreza [GC | G10], 1 Gen Facelift, Sedan, 09.1996 - 07.2000, Body: GC1, GC2, GC8
Subaru Impreza [GF | G10], 1 Gen, Wagon, 11.1992 - 08.1996, Body: GF1, GF3, GF4, GF6, GFA
Subaru Impreza [GF | G10], 1 Gen Facelift, Wagon, 09.1996 - 07.2000, Body: GF1, GF2, GF5, GF6, GF8


Europe & World:
Subaru Impreza WRX [GC | G10], 1 Gen, Sedan, Years: 06.1996 - 12.2000, Body: GC8LD3
Subaru Impreza WRX [GF | G10], 1 Gen, Wagon, Years: 06.1996 - 12.2000, Body: GF8LD3

Japan & World:
Subaru Impreza WRX [GC | G10], 1 Gen, Sedan, Years: 11.1992 - 08.1996, Body: GC8
Subaru Impreza WRX [GC | G10], 1 Gen Facelift, Sedan, Years: 09.1996 - 07.2000, Body: GC8
Subaru Impreza WRX [GF | G10], 1 Gen, Wagon, Years: 11.1992 - 08.1996, Body: GF8
Subaru Impreza WRX [GF | G10], 1 Gen Facelift, Wagon, Years: 09.1996 - 07.2000, Body: GF8


Japan & World:
Subaru Impreza WRX STI [GC | G10], 1 Gen, Sedan, Years: 01.1994 - 08.1996, Body: GC8
Subaru Impreza WRX STI [GC | G10], 1 Gen Facelift, Sedan, Years: 09.1996 - 09.2000, Body: GC8
Subaru Impreza WRX STI [GF | G10], 1 Gen, Wagon, Years: 01.1994 - 08.1996, Body: GF8
Subaru Impreza WRX STI [GF | G10], 1 Gen Facelift, Wagon, Years: 09.1996 - 09.2000, Body: GF8
Subaru Impreza WRX STI [GM, GC | G10], 1 Gen Facelift, Coupe, Years: 01.1997 - 09.2000, Body: GC8

Years of issue Impreza: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000

Rising Tuning company offers a convenient way to quickly and easily increase cross-country capability of your car - for this we recommend to buy spacers to increase ground clearance. Ground clearance is a characteristic, which largely determines the ability of the car to move on rough roads and unpaved roads, to drive over curbs and other obstacles. The lower the planting of the car, the less confident the driver feels off-road - by buying spacers, you can solve this problem.

Your car receives several undeniable advantages by installing spacers:
• Ground clearance is increased, thereby increasing off-road performance
• Increase the possible load of the car
• Spacers are also often used when installing mud rubber on off-road wheels
• Risk of mechanical damage to the engine housing and other engine compartment components is reduced
• Risk of scratches from bumpers and low-lying body parts being caught by bushes and grasses is minimized
• Save money on replacing weary coils by simply installing these affordable strut spacers and return car body to their original position.
• Alignment of the wheel mounting angles ( camber / convergence).

✅ After installing this extra-durable, easy-to-install and very affordable spacers all terrain features of your car will increase thanks to rised ground clearance and you will conquer the worst off-road.
✅ Sharp land bends, speed bumps, parking near curbs, maneuvering in the snow and on country roads, wherever before you had to be on the alert - no longer a problem with an additional 50mm under the bottom.
✅ Our spacers are often used when the stock springs lose their stiffness and spacers are the cheaper way to return the car to factory height than buying new springs.
✅ Spacers made of polyurethane and nylon have an additional damping effect, with them the ride will be even more pleasant. Whereas aluminum and steel spacers are essentially forever and will never need to be replaced.
✅ Also spacers are indispensable when installing larger diameter wheels.

  • Subaru
    • Impreza / WRX STi
      • I 1992-2000 (GC, GF, GM)
    • Legacy / Liberty
      • I 1989-1993 (BC, BJ, BF)



Product rating KEIN Lift Kit for Subaru Legacy 1st Gen | BC BJ BF & Subaru Impreza | GM GC GF

Leave a product review and get a coupon for your next purchase in our store

You may also like