KEIN Engine Mount kit for Toyota Altezza [XE10] Lexus IS300, Aristo [S160] & Lexus GS300, Lexus SC [Z40]

  • Product Code:
    KTL003
  • Product Article:
    product-4320
  • Rating:
  • Availability:

    In Stock

188,86 €

currency on the site: Euro (EUR).
Shipping already included in the cost of good FREE WORLDWIDE SHIPPING

KEIN Engine Mount for 2JZGE, 2JZGTE, 1JZGE motors for such cars as: Toyota Altezza (XE10), Toyota Aristo (S160), Toyota Progres (G10), Lexus GS (S160), Lexus IS (XE10), Lexus SC (Z40).
KEIN's stiffer engine mount damping bushings help to combat engine shifting during hard acceleration and cornering. during hard acceleration and dynamic cornering.
Reinforced engine mounts ensure correct and reliable operation of the engine and transmission at high engine speeds, allowing for more precise gear changes.
When cornering, the risk of drifting on exit is reduced, due to the rigid design of the engine mounts - increasing the dynamics and control of the car, which will be appreciated by both fans of rally and drifting, as well as ordinary fans of dynamic driving.

The special design of the engine mounts prevents the engine from tearing away from the subframe.
Even greater effect can be achieved by using KEIN engine mounts + KEIN transmission mounts in combination, the improved engine and transmission mounts allow more power to be transmitted to the driveshafts. The stiffer connection of the transmission support to the subframe reduces torque losses.
This solution is suitable for motorsport and aggressive driving enthusiasts, as you remove the soft rubber mounts, vibrations and engine noise in the cabin will be slightly higher.

Features:
• More efficient transmission of torque
• Reduces engine roll, which in turn improves acceleration.
• Increased sense of control and reduced risk of drifting out of corners.
• More precise gear shifting
• KEIN engine mounts are much more reliable and durable than standard engine mounts.

Item content:

KEIN reinforced engine mount kit for Toyota & Lexus - 2 pcs. (Left & Right)
• X2+X2 Quality molded high density silent blocks (inserted in the support)
Bolts with a strength of approximately 50 kN.

Hardness bushings:

Shore a hardness 65A (International Standard ISO 868)

Features:
• Material: Steel K02001/ K02502 
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc

Weight: 2.87kg.

Important:
The stiffer silent blocks and stiffer construction result in precise shifting and an overall improvement in vehicle dynamics.
There may be a slight increase in interior noise and vibration.

Installation:
Replaces original transmission mount (OEM part numbers):
• 12361-46190 • 1236146190
• 12360-46160 • 1236046160

For example, machines such as:

Engines: 2JZGE, 2JZGTE, 1JZGE
• Toyota Altezza, 1-st Gen, 1998 - 2005 (XE10)
• Toyota Aristo, 2-nd Gen, 1997 - 2005 (S160)
• Toyota Progres, 1-st Gen, 1998 - 2007 (G10)
• Lexus GS, 2-nd Gen, 1997 - 2005 (S160)
• Lexus IS, 1-st Gen, 1998 - 2005 (XE10)
• Lexus SC, 2-nd Gen, 2001 - 2010 (Z40)

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the suspension are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.

  • Lexus
    • GS
      • II 1997-2005 (S160, JZS160, UZS160)
    • IS
      • I 1999-2005 (XE10)
    • SC
      • II 2001 - 2010 (Z40)
  • Toyota
    • Altezza
      • I 1998 - 2005 (XE10)
    • Aristo
      • II 1997-2004 (S160, JZS160, JZS161)
    • Progres
      • I 1998-2001 (G10)

RelatedProducts

ProductReviews

Product rating KEIN Engine Mount kit for Toyota Altezza [XE10] Lexus IS300, Aristo [S160] & Lexus GS300, Lexus SC [Z40]

Leave a product review and get a coupon for your next purchase in our store


You may also like